ADACON UK

    Can Modular Buildings Include Kitchens?

    Yes. A P600 module can be fitted with anything from a small tea point to a full canteen kitchen or a café servery. Units, worktop, sink, plumbing, sockets and extraction are installed during manufacture, so the module arrives ready to connect rather than needing a second fit-out trade on site.

    Adacon Technical Team · Published

    Three common levels of kitchen

    Choosing the right level early avoids paying for capacity that never gets used.

    • Tea point — sink, worktop, a run of units, sockets for a kettle and microwave
    • Canteen kitchen — larger run of units, appliance space, seating in the adjoining space
    • Servery or commercial kitchen — extended worktop, extraction, multiple appliance circuits and a serving arrangement

    Cafés and serving windows

    For retail and hospitality use, a module can be fitted with a drive-through style sliding serving window at standing height with an external counter shelf, so customers are served without entering the building.

    Services

    Hot and cold water, waste, extraction and dedicated circuits are designed in at layout stage. Grease management and any commercial catering requirements are confirmed for the specific use.

    Where to go next

    P300–P700 range, or bespoke

    P200 unit
    1.9m × 2.2m externally; approximately 1.7m × 2.0m usable internally (3.4 m² usable internal area per separate unit)
    P300 unit
    2.9m × 2.2m externally; approximately 2.7m × 2.0m usable internally (5.4 m² usable internal area per separate unit)
    P400 unit
    3.9m × 2.2m externally; approximately 3.7m × 2.0m usable internally (7.4 m² usable internal area per separate unit)
    P500 unit
    4.9m × 2.2m externally; approximately 4.7m × 2.0m usable internally (9.4 m² usable internal area per separate unit)
    P600 unit
    5.9m × 2.2m externally; approximately 5.7m × 2.0m usable internally (11.4 m² usable internal area per separate unit)
    P700 unit
    6.9m × 2.2m externally; approximately 6.7m × 2.0m usable internally (13.4 m² usable internal area per separate unit)
    Configuration
    Mix P200, P300, P400, P500, P600 and P700 units to create tailored footprints and shapes
    Bespoke
    Bespoke sizes considered to suit your brief — contact us
    Joined internal space
    Open joins remove the adjoining shell walls and can increase usable space. Final clear area depends on layout and partitions.
    Unit height
    2.40m external / 2.16m internal
    Storeys
    Up to two storeys, subject to final project design
    Delivery
    UK mainland and Northern Ireland — transport quoted separately

    Adacon modular buildings use P200, P300, P400, P500, P600 and P700 units with external lengths of 1.9m, 2.9m, 3.9m, 4.9m, 5.9m and 6.9m, a common 2.2m width and 2.40m external / 2.16m internal height. The sizes can be combined to create more tailored floor areas and building shapes, joined side by side or stacked to two storeys subject to the final project design.

    Design your modular building online

    Set the layout, windows, doors and fit-out and see a live estimate as you go.

    Design Your Modular Building

    More guides

    Get a price for Modular Buildings

    Tell us what you need and we'll come back with pricing and lead times — usually within one working day.

    So we can call you back about your enquiry

    Enquiring about: Modular Buildings

    No obligation. We reply within one working day.