ADACON UK

    Can Modular Buildings Include Toilets and Showers?

    Yes. Adacon P600 modules can be configured with toilets, showers, wash basins, internal partitions and the associated plumbing and electrical systems. These can sit inside a single module alongside other space, occupy a whole module as a dedicated sanitary block, or be repeated across several modules for higher capacity.

    Adacon Technical Team · Published

    Typical sanitary arrangements

    How the space is divided depends on the number of users and whether the facility is public, workforce or domestic.

    • Single WC within an office or garden room module
    • WC and shower combined in one module for site welfare
    • Dedicated toilet block with multiple cubicles and a wash trough
    • Shower block with a wet zone, dry changing zone and benching
    • Accessible provision, specified at design stage

    Services and connections

    Internal plumbing, drainage runs and electrics are installed in the factory. Connection to incoming water, foul drainage and power is done on site — either into mains services, or into tanks and a pump-out arrangement where mains connections are not available.

    Ventilation and finishes

    Wet areas are finished with wipe-clean surfaces and mechanical extraction, which matters far more in a shower block used by a full workforce than in an occasional-use WC.

    Where to go next

    P300–P700 range, or bespoke

    P200 unit
    1.9m × 2.2m externally; approximately 1.7m × 2.0m usable internally (3.4 m² usable internal area per separate unit)
    P300 unit
    2.9m × 2.2m externally; approximately 2.7m × 2.0m usable internally (5.4 m² usable internal area per separate unit)
    P400 unit
    3.9m × 2.2m externally; approximately 3.7m × 2.0m usable internally (7.4 m² usable internal area per separate unit)
    P500 unit
    4.9m × 2.2m externally; approximately 4.7m × 2.0m usable internally (9.4 m² usable internal area per separate unit)
    P600 unit
    5.9m × 2.2m externally; approximately 5.7m × 2.0m usable internally (11.4 m² usable internal area per separate unit)
    P700 unit
    6.9m × 2.2m externally; approximately 6.7m × 2.0m usable internally (13.4 m² usable internal area per separate unit)
    Configuration
    Mix P200, P300, P400, P500, P600 and P700 units to create tailored footprints and shapes
    Bespoke
    Bespoke sizes considered to suit your brief — contact us
    Joined internal space
    Open joins remove the adjoining shell walls and can increase usable space. Final clear area depends on layout and partitions.
    Unit height
    2.40m external / 2.16m internal
    Storeys
    Up to two storeys, subject to final project design
    Delivery
    UK mainland and Northern Ireland — transport quoted separately

    Adacon modular buildings use P200, P300, P400, P500, P600 and P700 units with external lengths of 1.9m, 2.9m, 3.9m, 4.9m, 5.9m and 6.9m, a common 2.2m width and 2.40m external / 2.16m internal height. The sizes can be combined to create more tailored floor areas and building shapes, joined side by side or stacked to two storeys subject to the final project design.

    Design your modular building online

    Set the layout, windows, doors and fit-out and see a live estimate as you go.

    Design Your Modular Building

    More guides

    Get a price for Modular Buildings

    Tell us what you need and we'll come back with pricing and lead times — usually within one working day.

    So we can call you back about your enquiry

    Enquiring about: Modular Buildings

    No obligation. We reply within one working day.