Shower Blocks for Sale
Pre-built shower blocks for campsites, sports clubs and sites — request a price and layout.
A shower block lives or dies on hot water capacity, drainage falls and ventilation. We build the wet area properly — tanked floors, correct falls to gullies, mechanical extract — so the unit stays dry, safe and easy to clean.

Guest shower blocks for peak season.
Showers for players after training and matches.
Shift-end showers for teams.
Shared shower facilities for visitors.
Every layout is designed around your requirements. Send drawings, a sketch or an existing specification with your enquiry below.
Request a price and layout — shower blocks
Tell us what you need and we'll come back with pricing and lead times — usually within one working day.
Campsite and holiday-park shower blocks
For campsites, the layout is planned around how many guests use the showers at the busiest time, how they reach the block and how it is cleaned between uses. Options can include separate entrances, a dry changing area, toilets in the same building and an accessible shower.
- Number of showers set to your busiest period
- Instant hot water to each shower
- Options can include toilets and wash basins in the same block
- Options can include an accessible shower
- Heating and frost protection can be specified for year-round use
Hot water, drainage and drying space
The most common problem with shower facilities is running out of hot water at shift end or after a match. We size the water heating around peak simultaneous use, and always allow a dry changing zone next to the cubicles.
- Cubicle count sized to peak simultaneous users
- Hot water provision sized to demand, not just cubicle count
- Tanked wet areas with correct falls to drainage
- Separate dry changing zone with bench and hooks
- Mechanical extract to control condensation
- Non-slip flooring and wipe-clean wall finishes
Example configurations
Buildings combine P300, P400, P500, P600 and P700 units, with bespoke options. A separate P600 provides approximately 11.4 m² usable internally. Example areas use a conservative per-module allowance before partitions; open joins can provide more space. Units can be combined or stacked over two storeys.
Two to three shower cubicles with a dry changing area.
Separate male and female shower facilities.
Team-scale facility with changing, showers and WCs.
Delivery, site works and connections
We deliver UK-wide. Your site needs a suitable base and water, drainage and power connections — we can advise, and coordinate the site works under our project-management service if you want one point of contact.
Hire Modular Shower Blocks in the UK
Need modular shower blocks for a fixed period? Hire it instead of buying. Adacon manufactures the building to your layout and hands it over on hire terms, then collects it when you no longer need it — with the same quality, fit-out and design freedom as a purchase.
Hire terms are flexible — tell us how long you need the unit and we will confirm the rate for that period.
Get a hire price for modular shower blocks
Tell us when you need it and for how long. We reply with hire terms — and a purchase price too if you tick compare.
Were you originally considering hiring?
We can compare the purchase price against your expected hire period.
Modular Shower Blocks — key facts
- P200 unit
- 1.9m × 2.2m externally; approximately 1.7m × 2.0m usable internally (3.4 m² usable internal area per separate unit)
- P300 unit
- 2.9m × 2.2m externally; approximately 2.7m × 2.0m usable internally (5.4 m² usable internal area per separate unit)
- P400 unit
- 3.9m × 2.2m externally; approximately 3.7m × 2.0m usable internally (7.4 m² usable internal area per separate unit)
- P500 unit
- 4.9m × 2.2m externally; approximately 4.7m × 2.0m usable internally (9.4 m² usable internal area per separate unit)
- P600 unit
- 5.9m × 2.2m externally; approximately 5.7m × 2.0m usable internally (11.4 m² usable internal area per separate unit)
- P700 unit
- 6.9m × 2.2m externally; approximately 6.7m × 2.0m usable internally (13.4 m² usable internal area per separate unit)
- Configuration
- Mix P200, P300, P400, P500, P600 and P700 units to create tailored footprints and shapes
- Bespoke
- Bespoke sizes considered to suit your brief — contact us
- Joined internal space
- Open joins remove the adjoining shell walls and can increase usable space. Final clear area depends on layout and partitions.
- Unit height
- 2.40m external / 2.16m internal
- Storeys
- Up to two storeys, subject to final project design
- Delivery
- UK mainland and Northern Ireland — transport quoted separately
Adacon modular buildings use P200, P300, P400, P500, P600 and P700 units with external lengths of 1.9m, 2.9m, 3.9m, 4.9m, 5.9m and 6.9m, a common 2.2m width and 2.40m external / 2.16m internal height. The sizes can be combined to create more tailored floor areas and building shapes, joined side by side or stacked to two storeys subject to the final project design.
What's available for a modular shower block
Modular Shower Blocks — photo gallery







Design your shower block
Choose cubicle numbers and facilities and get an estimated price.
Modular Shower Blocks — common questions
Also need toilets, showers or changing rooms?
Related uses
Pre-built toilet blocks for sale, designed around your site. Campsites, sports grounds, construction sites and events. Request a price and layout.
Combined pre-built toilet and shower blocks and amenity blocks for campsites, sports clubs and sites. Mix of facilities set per site. Request a price.
Modular changing rooms for sports clubs, staff facilities and leisure sites. Benches, lockers, showers and wet/dry zoning. Configure yours online.
Need the facilities inside an existing building instead?
This page covers a standalone modular building. Where the toilets, showers or washrooms need to go inside a warehouse, factory, gym or other existing building — or be incorporated into a new development — see our bathroom pod and prefabricated washroom solutions.
Design options for this build
All design optionsLiving in one of these?
All modular homesUseful guides
Yes — P600 modules can be stacked to create two-storey modular offices, welfare blocks and clubhouses, with an internal or external staircase.
Yes. P600 modules can be configured with WCs, showers, wash areas, partitions and the associated plumbing — as part of a building or as a standalone sanitary block.
How kitchens, shower rooms and WCs are designed into a garden annexe or garden room, and what it means for services and planning.
Built from five unit sizes, or bespoke
Every Adacon building is made from these units, or built to a bespoke size. Units can be combined — joined end to end, side by side, or stacked to two storeys — to create larger buildings.
| Unit | External footprint | Approximate usable internal area |
|---|---|---|
| P200 | 1.9m × 2.2m | 1.7m × 2.0m (≈3.4 m²) |
| P300 | 2.9m × 2.2m | 2.7m × 2.0m (≈5.4 m²) |
| P400 | 3.9m × 2.2m | 3.7m × 2.0m (≈7.4 m²) |
| P500 | 4.9m × 2.2m | 4.7m × 2.0m (≈9.4 m²) |
| P600 | 5.9m × 2.2m | 5.7m × 2.0m (≈11.4 m²) |
| P700 | 6.9m × 2.2m | 6.7m × 2.0m (≈13.4 m²) |
| Bespoke | Built to your size | Contact us |