3-Module Modular Changing Rooms with WC and Shower

Configuration overview

This single-storey building combines three steel-framed P600 modules in a grid layout. Each module measures 5.9m × 2.2m, creating an overall 11.8m × 4.4m footprint and approximately 37m² of internal floor area. The three modules occupy an L-shaped arrangement within the grid, leaving the south-east corner open.

• Three P600 modules
• Single-storey configuration
• Approximately 37m² internal floor area
• 11.8m × 4.4m overall footprint
• WC and shower included in the internal fit-out

This configuration is intended for the Sport & Leisure sector, particularly football, rugby and cricket clubs. It provides a defined starting point for buyers comparing practical modular changing rooms without commissioning a layout from scratch.

Module-by-module layout

Module 1 forms the north-west section of the building. Its exposed north wall has a small window, a glazed double door and a second small window. This is the building’s external entrance. The exposed west end has two further small windows.

Module 2 occupies the north-east position. Its exposed north side contains three small windows, while the east end contains two. The south side, facing the open corner of the grid, has another three small windows. This gives the module natural light from three directions.

Module 3 forms the south-west section. The exposed east end has two small windows facing the open grid position. Its south side has three small windows, and the west end has two more. Across the complete building, the specified elevations provide one glazed double door and 20 small windows.

Exterior and internal fit-out

The exterior is finished in smooth Light grey cladding. A flat roof and slim fascia keep the roofline simple and low-profile, giving the changing rooms a clean appearance suited to sports grounds and club facilities. The building is supplied as a fitted modular system rather than an unfinished shell.

The internal fit-out includes a WC and shower, supporting its use as a club changing facility. The precise internal allocation of changing space and the position of the WC and shower should be confirmed during the order process. Buyers who need to review or adapt the arrangement can use the P600 configurator as the basis for that discussion.

Price and programme

The indicative price is £32,250 excluding VAT, or £38,700 including VAT, for the standard fitted specification described here. This covers the three-module building with the stated Light grey exterior, flat roof, slim fascia, listed doors and windows, WC and shower. The final quotation will confirm the complete supply scope.

Delivery, groundworks and site-specific works are quoted separately. A typical lead time is 8–12 weeks, subject to final specification, order approval, site requirements and the delivery programme.

Siting requirements

The site needs suitable prepared and level support for the 11.8m × 4.4m layout, together with clear access for delivery and installation. Water and foul drainage connections will be required for the WC and shower. Ground conditions, service routes, access restrictions and any planning or building control requirements must be assessed for the individual site before installation.