ADACON UK

    Modular Classrooms in Birmingham

    Adacon provides high-specification modular classrooms to schools, academies, and nursery providers across Birmingham and the West Midlands. Our P300/P400/P600 modular range offers a permanent-quality teaching environment without the disruption of traditional brick-and-mortar builds. From single-module SEN spaces to multi-module classroom blocks, our steel-framed units are manufactured off-site and delivered ready for final connection. We serve the entire city, including congested urban sites in Edgbaston and Ladywood, as well as suburban and rural academy sites in Sutton Coldfield and Solihull, providing a cost-effective solution for rising pupil numbers.

    Delivery and planning in Birmingham

    Delivery route
    M6 and M42, then the A38 corridor
    Typical access
    Most suburban plots take a standard artic and crane; city-centre and Clean Air Zone deliveries are scheduled around charging hours.
    Delivery cost
    Quoted separately from the module price, based on distance, access and lifting equipment. Groundworks, a level prepared base, final electrical connection and drainage are quoted separately.
    Planning
    Rules are project-specific — check with Birmingham City Council before ordering. Planning guidance

    Modular School Solutions for the West Midlands

    As Birmingham continues to see significant urban development and population growth, schools and colleges often face the challenge of expanding capacity within tight deadlines and limited footprints. Adacon’s P600 modular buildings are designed to meet this demand, offering a high-performance alternative to both traditional construction and temporary portacabins. Unlike converted shipping containers, our units are purpose-built steel frames with a 2.5m internal ceiling height, providing the air volume and natural light necessary for a productive learning environment.

    Classroom Configurations and Capacity

    The P300/P400/P600 modular range is based on individual 13m² modules that can be combined in various layouts to suit your site’s specific requirements. Because our system is modular, we can accommodate anything from a quiet intervention room to a full-sized primary classroom.

    • Single Module (13m²): Ideal for 1-to-1 SEN support, a small music practice room, or a private office for a department head.
    • Double Module (26m²): Suitable for small group breakout sessions, nursery wrap-around care, or a satellite staff room.
    • Four+ Modules (52m²+): A standard full-size classroom configuration for 30 pupils plus storage. These can be arranged as large open-plan spaces or partitioned to include internal WCs and cloakrooms.

    For more complex layouts, including L-shapes or two-storey blocks with internal staircases, you can experiment with the free P600 configurator to visualise the space and receive an instant price estimate.

    High-Performance Specification as Standard

    We believe a learning environment should be durable and comfortable. Every Adacon classroom delivered to Birmingham includes a high-specification internal finish as standard, ensuring the building is ready for use shortly after arrival. The standard package includes:

    • Fully insulated floor, walls, and roof for thermal efficiency.
    • Plastered and painted internal walls (not plastic-coated boards).
    • Hard-wearing laminate flooring suitable for high footfall.
    • LED lighting and ample power sockets for classroom technology.
    • Double-glazed uPVC windows and high-security external doors.
    • Customisable exterior cladding available in a range of RAL colours to match existing school branding or campus aesthetics.

    Optional upgrades include integrated air conditioning units for climate control, internal toilet and hand-wash partitions, and bespoke kitchenettes for staff areas.

    Indicative Pricing for Birmingham Schools

    Transparent pricing is core to our service. While every project varies based on the final specification and site-specific groundworks, a typical modular classroom project in the West Midlands usually falls within the range of £30,000 to £90,000.

    This range covers the manufacturing and delivery of the modules. It is important to note that groundworks—such as a level concrete base or screw piles—and final utility connections (electricity, water, and data) are quoted separately and remain the responsibility of the client or their appointed contractor. For a detailed breakdown of costs based on your specific headcount and site constraints, you can request a bespoke quote from our technical team.

    Delivery and Site Access Logistics

    Birmingham’s geography presents unique logistical challenges, from the narrow residential streets of areas like Sparkbrook to the busy arterial routes of the A38(M) and M6. Adacon manages the transport of modules from our production facility directly to your site.

    For urban Birmingham sites, we coordinate closely on access. If your school is located in a congested area or has limited driveway width, we may utilise HIAB crane vehicles or separate mobile cranes to lift modules over existing structures. Our team assesses the journey—typically via the M6, M5, or M42 corridors—to ensure that wide-load restrictions and local traffic patterns are accounted for, minimising disruption to the school day.

    Lead Times and Installation

    Traditional builds can take months or years to navigate. Adacon lead times are typically measured in weeks. Because the modules are manufactured in a controlled factory environment, site preparation can occur simultaneously with production. Once the modules arrive in Birmingham, the physical assembly of a standard two-module classroom is often completed within a few days, significantly reducing the health and safety risks associated with long-term construction sites on school grounds.

    Local Authority and Planning Context

    Whether your project falls under Birmingham City Council, Solihull Metropolitan Borough Council, or Sandwell, planning permission requirements vary. While many modular classrooms qualify for temporary planning or fall under permitted development for schools, this is project-specific. We strongly advise all Birmingham clients to consult with their local planning department or a planning consultant early in the process. Similarly, compliance with Building Regulations regarding fire safety, accessibility (Part M), and ventilation is the responsibility of the school to ensure the building meets its intended legal use.

    Why Choose Adacon?

    Adacon is a specialist UK supplier focused on the P300/P400/P600 modular range. We are not a shipping-container reseller; we provide purpose-built steel-framed buildings designed for longevity. Our buildings provide the same level of comfort as a modular office or permanent school wing, but with the flexibility to be relocated or expanded if the school’s needs change in the future.Transport to site is quoted separately, based on distance and access.

    Design yours online — free

    You can lay out a modular classrooms in Birmingham yourself in a few minutes with the free Adacon P600 configurator: arrange the modules in 3D, pick your windows, doors and cladding colours wall by wall, and see an estimated price straight away. There is no obligation and no salesperson — save the design and we will pick it up from there.

    Prefer to talk it through? Request a free quote and we will come back with a specification and price for your project.

    Frequently asked questions

    See everything we supply across West Midlands

    Get a quote for your modular classrooms in birmingham

    Free consultation. UK-wide delivery, quoted separately per site.

    Get a price for Modular Classrooms in Birmingham

    Tell us what you need and we'll come back with pricing and lead times — usually within one working day.

    So we can call you back about your enquiry

    Enquiring about: Modular Classrooms in Birmingham

    No obligation. We reply within one working day.