ADACON UK
    P600 security cabin at a controlled-access distribution centre
    Single-module P600 security cabin configured for security and site-control use.

    Security Cabins

    Single-Module P600 Security Cabin, WC Requested

    This single-storey P600 security cabin provides a compact, well-glazed space for monitoring and controlling access. It suits sites, car parks and distribution centres requiring a dedicated point for security and site control.

    £14,100ex VAT

    £16,920 inc VAT · indicative configured estimate, subject to quotation. Transport depends on postcode and access; offloading, groundworks and site-specific works are separate.

    Made to order. Build and delivery timing will be confirmed with your quotation.

    Call about this item
    PLACE ORDER

    Order the standard specification online. We'll confirm delivery, access and final order details before accepting your order and issuing your invoice.

    Built to order in approx. 7–8 weeks, then delivery typically within 1–2 weeks. Delivery is priced by postcode and confirmed with your quote.

    Change the layout in the configurator
    Modules
    1
    Storeys
    1
    Approx. usable internal area
    11.4 m² before partitions
    External dimensions
    5.9m x 2.2m footprint

    Design highlights

    • One P600 module in a single-storey run layout
    • 5.9m x 2.2m external footprint
    • Approximately 11.4m² usable internal area before partitions
    • Glazed door with windows on all four elevations
    • Anthracite ARLINE AR14514 fine-ribbed vertical cladding
    • Flat roof with approximately 120mm steel-frame fascia
    • WC requested, subject to final layout confirmation

    Single-module layout

    This configuration uses one P600 steel-framed module arranged as a single-storey run. Its external footprint is 5.9m x 2.2m, with an external module height of 2.40m and an internal ceiling height of approximately 2.16m. The approximate usable interior measures 5.7m x 2.0m, providing around 11.4m² of usable internal area before partitions. This is a conservative per-module allowance.

    The compact format is intended for security and site-control duties where staff need clear views of approaching vehicles, pedestrians or controlled entrances. Typical settings include operational sites, car parks and distribution centres. Further examples of this building type can be found in our security cabins section.

    Windows and entrance

    The north 5.9m wall contains three small windows. The opposite south wall is arranged with a single glazed door positioned between two small windows. Each 2.2m end wall has a full-size window: one on the east end and one on the west end. Together, these stored openings provide glazing on all four elevations without changing the module’s stated footprint.

    The glazed entrance and surrounding windows are specific to this configuration. Final fixture details, dimensions and finishes are confirmed through the quotation and completed layout rather than assumed from illustrations.

    Anthracite external finish

    All four exposed walls are specified with full-wall ARLINE AR14514 fine-ribbed cladding. The Anthracite vertical boards are applied between the steel frame on the north, east, south and west elevations, creating a consistent finish around the complete module. Cladding is priced as part of the quotation and is not publicly itemised separately.

    The module has a flat roof with an approximately 120mm steel-frame fascia. No additional fascia is selected for this design.

    Requested WC and internal finishes

    A WC has been requested for the internal fit-out and remains subject to confirmation in the final room layout. Any partitioning required for the WC will reduce the stated usable internal area before partitions. The location of the sanitary space, its door and associated fittings must therefore be resolved when the layout is finalised.

    Insulated sandwich panels are the included wall finish elsewhere in the module. Bathroom walls use 40mm waterproof insulated sandwich panels as standard, with hygienic panels available as an optional selection. Where plaster is selected, it applies outside bathroom walls. Other wall finishes are chosen to suit the final room arrangement. If the design is developed to include a shower room, wet-room PVC flooring is used within that shower space; a shower is not part of the stored configuration.

    Quotation and site requirements

    The indicative configured estimate is £14,100 ex VAT, or £16,920 including VAT, subject to quotation and confirmation of the requested WC layout. Configuration details can be reviewed through the building configurator.

    Transport is priced separately according to the delivery postcode and site access. Offloading or cranage, groundworks and other site-specific works are also separate. Siting is subject to survey, including confirmation of access, positioning, ground conditions and any operational constraints affecting the proposed security-cabin location.

    Full specification

    1 P600 module (single storey), run layout, 5.9m x 2.2m footprint, approx 11.4 m2 usable internal area before partitions (conservative per-module allowance; connected open layouts may provide more space). Each module is 2.40m externally with a 2.16m internal ceiling; its approximate usable interior is 5.7m x 2.0m.
    Exterior: ARLINE AR14514 fine-ribbed applied to exposed walls between the frame in Anthracite. Roof: flat roof with approximately 120mm steel-frame fascia (no extra fascia).
    Selected outside walls: Module 1 North wall: Full-wall cladding, Anthracite, ARLINE AR14514 fine-ribbed, vertical boards; Module 1 East wall: Full-wall cladding, Anthracite, ARLINE AR14514 fine-ribbed, vertical boards; Module 1 South wall: Full-wall cladding, Anthracite, ARLINE AR14514 fine-ribbed, vertical boards; Module 1 West wall: Full-wall cladding, Anthracite, ARLINE AR14514 fine-ribbed, vertical boards. Cladding prices are quote-only and must not be itemised in public copy.
    Module 1 P600 (ground floor) exposed walls — north (5.9m side): Small window + Small window + Small window; east (2.2m end): Full-size window; south (5.9m side): Small window + Glazed door (single) + Small window; west (2.2m end): Full-size window.
    Requested fit-out to confirm in the final layout: WC. Bathroom walls use 40mm waterproof insulated sandwich panels as standard, with hygienic panels optional; shower rooms use wet-room PVC flooring. Plaster applies outside bathroom walls when selected. Elsewhere insulated sandwich panels are the included wall finish; other finishes are selected for the final room layout.

    Frequently asked questions

    Make it yours

    Change the module count, layout, windows, doors and finish — then get an instant estimate.

    Get a price for Single-Module P600 Security Cabin, WC Requested

    Tell us what you need and we'll come back with pricing and lead times — usually within one working day.

    So we can call you back about your enquiry

    Enquiring about: Single-Module P600 Security Cabin, WC Requested

    No obligation. We reply within one working day.