ADACON UK
    P600 gatehouse at a controlled site entrance in daylight.
    Single-module P600 configuration designed as a gatehouse for security and site control.

    Gatehouses

    Single-Module P600 Gatehouse with Serving Window

    This single-storey P600 gatehouse combines a sliding drive-through serving window, glazed entrance door, two large windows and a requested WC. It suits security and site control at logistics parks, schools and gated developments.

    £12,900ex VAT

    £15,480 inc VAT · indicative configured estimate, subject to quotation. Transport depends on postcode and access; offloading, groundworks and site-specific works are separate.

    Made to order. Build and delivery timing will be confirmed with your quotation.

    Call about this item
    PLACE ORDER

    Order the standard specification online. We'll confirm delivery, access and final order details before accepting your order and issuing your invoice.

    Built to order in approx. 7–8 weeks, then delivery typically within 1–2 weeks. Delivery is priced by postcode and confirmed with your quote.

    Change the layout in the configurator
    Modules
    1
    Storeys
    1
    Approx. usable internal area
    11.4 m² before partitions
    External dimensions
    5.9m x 2.2m footprint

    Design highlights

    • One 5.9m x 2.2m P600 module
    • Approximately 11.4m² usable internal area before partitions
    • Sliding drive-through serving window
    • Single glazed entrance door
    • Large window in each end wall
    • Smooth Cream RAL 9001 insulated exterior panels
    • Requested WC subject to final layout confirmation

    A compact security and site control building

    This P600 configuration uses one steel-framed module to provide a compact gatehouse for staffed entrances and controlled access points. Its external footprint is 5.9m x 2.2m, with an external height of 2.40m and an internal ceiling height of approximately 2.16m. The module provides approximately 11.4m² of usable internal area before partitions, based on an approximate usable interior of 5.7m x 2.0m.

    The single-storey layout is intended for security and site control duties where staff need visibility, a sheltered working area and a direct point of contact with visitors or drivers. Typical settings include logistics parks, schools and gated developments. Further examples of how this type of building can support controlled entrances are available on the gatehouses page.

    Openings arranged for access and visibility

    The exposed north wall, along the 5.9m side, has a sliding drive-through serving window. This creates a practical point for communication or document handover at a vehicle approach. A single glazed door is positioned in the opposite south wall. Each 2.2m end wall has a large window, giving the east and west elevations additional glazing for outward views and natural light.

    • Sliding drive-through serving window on the north wall
    • Single glazed door on the south wall
    • Large window in each end wall
    • One module arranged over a single storey

    Cream insulated-panel exterior

    All four outside walls use included vertical insulated sandwich panels in Cream, RAL 9001, with a smooth finish. The module has a flat roof and an approximately 120mm steel-frame fascia, with no additional fascia selected. Final colours, components and visual details are confirmed as part of the quotation.

    Requested WC and internal finishes

    A WC has been requested for this gatehouse, subject to confirmation in the final room layout and quotation. Adding its walls will reduce the usable internal area available outside the partition. Bathroom walls use 40mm waterproof insulated sandwich panels as standard, while hygienic panels are optional. Where plaster is selected, it applies outside the bathroom walls. Shower-room wet-room PVC flooring is relevant only if a shower room is selected; no shower is specified in this stored configuration.

    Elsewhere, insulated sandwich panels are the included internal wall finish. Other wall and floor finishes can be selected when the final room arrangement is agreed, without implying that every illustrated fixture or decorative treatment forms part of this configuration. The stored arrangement can be reviewed through the building configurator, with final details established by quotation.

    Quotation, transport and siting

    The indicative configured estimate is £12,900 excluding VAT, or £15,480 including VAT, subject to quotation. Transport is priced separately according to the delivery postcode and site access. Offloading or cranage, groundworks and other site-specific works are also separate. Positioning and access requirements remain subject to a site survey, including the proposed location, route to site and any constraints affecting transport or offloading.

    Full specification

    1 P600 module (single storey), single layout, 5.9m x 2.2m footprint, approx 11.4 m2 usable internal area before partitions (conservative per-module allowance; connected open layouts may provide more space). Each module is 2.40m externally with a 2.16m internal ceiling; its approximate usable interior is 5.7m x 2.0m.
    Exterior: included vertical insulated sandwich panels in Cream (RAL 9001). Roof: flat roof with approximately 120mm steel-frame fascia (no extra fascia).
    Selected outside walls: Module 1 North wall: Standard insulated panel, Cream (RAL 9001), Smooth; Module 1 East wall: Standard insulated panel, Cream (RAL 9001), Smooth; Module 1 South wall: Standard insulated panel, Cream (RAL 9001), Smooth; Module 1 West wall: Standard insulated panel, Cream (RAL 9001), Smooth. Cladding prices are quote-only and must not be itemised in public copy.
    Module 1 P600 (ground floor) exposed walls — north (5.9m side): Drive-through serving window (sliding); east (2.2m end): Large window; south (5.9m side): Glazed door (single); west (2.2m end): Large window.
    Requested fit-out to confirm in the final layout: WC. Bathroom walls use 40mm waterproof insulated sandwich panels as standard, with hygienic panels optional; shower rooms use wet-room PVC flooring. Plaster applies outside bathroom walls when selected. Elsewhere insulated sandwich panels are the included wall finish; other finishes are selected for the final room layout.

    Frequently asked questions

    Make it yours

    Change the module count, layout, windows, doors and finish — then get an instant estimate.

    Get a price for Single-Module P600 Gatehouse with Serving Window

    Tell us what you need and we'll come back with pricing and lead times — usually within one working day.

    So we can call you back about your enquiry

    Enquiring about: Single-Module P600 Gatehouse with Serving Window

    No obligation. We reply within one working day.