ADACON UK
    4-module two-storey site welfare unit, Adacon modular building (illustrative)
    Four-module, two-storey P600 site welfare unit for construction-site canteen, drying-room, shower and WC use.

    Site Welfare Units

    4-Module Site Welfare Unit with Canteen, Shower and WC

    This four-module P600 site welfare unit provides approx. 45.60 m² usable internal area before partitions over two storeys, complete with a kitchenette, WC and shower. It suits construction sites requiring practical canteen, drying-room and welfare facilities within a compact 5.9m x 4.4m footprint.

    £51,600ex VAT

    £61,920 inc VAT · indicative configured estimate, subject to quotation. Transport depends on postcode and access; offloading, groundworks and site-specific works are separate.

    Made to order. Build and delivery timing will be confirmed with your quotation.

    Call about this item
    PLACE ORDER

    Order the standard specification online. We'll confirm delivery, access and final order details before accepting your order and issuing your invoice.

    WhatsApp

    Built to order in approx. 7–8 weeks, then delivery typically within 1–2 weeks. Delivery is priced by postcode and confirmed with your quote.

    Change the layout in the configurator
    Modules
    4
    Storeys
    2
    Approx. usable internal area
    45.6 m² before partitions
    External dimensions
    5.9m x 4.4m footprint

    Design highlights

    • Four linked P600 modules over two storeys
    • approx. 45.60 m² usable internal area before partitions
    • Compact 5.9m x 4.4m footprint
    • Internal staircase between floors
    • Kitchenette, WC and shower included
    • Light grey horizontal exterior cladding
    • Glazed double entrance door

    Two-storey welfare space for active sites

    This configuration combines four 5.9m x 2.2m P600 modules to form a two-storey building with an overall footprint of 5.9m x 4.4m. It provides approx. 45.60 m² usable internal area before partitions without taking up the ground space of a comparable single-storey layout. Designed for the construction sector, it is a practical option for sites that need canteen, drying-room and WC facilities in one building. See further information on site welfare units.

    Module-by-module layout

    The modules are linked in pairs at ground and first-floor level, with an internal staircase connecting the two floors. The staircase is contained within the building and is not visible externally.

    • Module 1, ground floor: The north-facing 5.9m elevation has a glazed double door positioned between two small windows. The east and west 2.2m ends each have one top-only, high-level window.
    • Module 2, ground floor: The south-facing 5.9m elevation has two top-only, high-level windows. Its exposed east and west ends each have a further top-only, high-level window.
    • Module 3, first floor: The north-facing elevation has three small windows. Both exposed 2.2m end walls have two small windows, giving four end windows across the east and west elevations.
    • Module 4, first floor: The south-facing elevation has three small windows. The east and west ends each have two small windows, matching the first-floor window arrangement of Module 3.

    The single external entrance is through the glazed double door on the north elevation. High-level ground-floor windows provide controlled daylight and privacy, while the first floor has a broader spread of small windows on all exposed sides.

    Exterior and internal fit-out

    The exterior is finished with horizontal cladding in Light grey. A flat roof with a slim fascia keeps the profile straightforward and suitable for a working construction environment. The steel-framed P600 modules are delivered as a coordinated building and stacked to create the specified two-storey arrangement.

    The standard fitted specification includes a kitchenette, WC and shower. These facilities support day-to-day welfare use, including meal breaks, washing and changing or drying-room requirements. The exact operational use of the remaining internal space can be planned around site staffing and working practices.

    Price and specification

    The indicative price is £51,600 excluding VAT, or £61,920 including VAT, for the standard fitted specification described here. Delivery, groundworks and site-specific works are not included and are quoted separately because access, distance, foundations, service requirements and installation conditions vary by site. Alternative P600 arrangements can be explored through the P600 configurator.

    Lead time and siting

    A typical lead time is 8–12 weeks, subject to specification confirmation, production scheduling and site readiness. Before delivery, the site needs suitable prepared groundworks, clear access for the modules and installation plant, and provision for the required utility connections. Available working space, overhead restrictions and the route to the final position should also be checked. Any planning, Building Regulations or other site-specific approval requirements must be established for the intended location and period of use.

    Full specification

    4 P600 modules (two storeys), two-storey layout, 5.9m x 4.4m footprint, approx. 45.60 m² usable internal area before partitions.
Exterior: horizontal cladding in Light grey. Roof: flat roof with slim fascia.
Module 1 (ground floor) exposed walls — north (5.9m side): Small window + Glazed door (double) + Small window; east (2.2m end): Top-only window (high level); west (2.2m end): Top-only window (high level).
Module 2 (ground floor) exposed walls — east (2.2m end): Top-only window (high level); south (5.9m side): Top-only window (high level) + Top-only window (high level); west (2.2m end): Top-only window (high level).
Module 3 (first floor) exposed walls — north (5.9m side): Small window + Small window + Small window; east (2.2m end): Small window + Small window; west (2.2m end): Small window + Small window.
Module 4 (first floor) exposed walls — east (2.2m end): Small window + Small window; south (5.9m side): Small window + Small window + Small window; west (2.2m end): Small window + Small window.
Internal staircase between the two floors (not visible outside).
Internal fit-out includes: kitchenette, WC, shower.

    Frequently asked questions

    Site Welfare UnitsModular buildings for ConstructionAll modular building designsDesign your own P600
    Also available to hire

    Hire 4-Module Site Welfare Unit with Canteen, Shower and WC in the UK

    Need 4-module site welfare unit with canteen, shower and wc for a fixed period? Hire it instead of buying. Adacon manufactures the building to your layout and hands it over on hire terms, then collects it when you no longer need it — with the same quality, fit-out and design freedom as a purchase.

    Same factory build
    The same 4-module site welfare unit with canteen, shower and wc we sell, manufactured to your layout — not a tired fleet unit.
    Weeks to years
    Hire for a project, a season, a term or several years, and extend if plans change.
    Any size or storey
    P300, P400, P500, P600 and P700 units joined side by side or stacked to two storeys.
    Ready to use
    Insulated, wired, lit and fitted out in the factory before it reaches site.
    Hire or buy — priced both ways
    Not sure? Tick compare and we price hire against buying for your period.
    UK-wide
    Delivery and collection quoted to your site as part of the hire price.
    Typical hire periods
    1–3 months3–12 months1–3 years3+ years
    Get a hire priceSite Welfare Unit Hire

    Hire terms are flexible — tell us how long you need the unit and we will confirm the rate for that period.

    Get a hire price for 4-module site welfare unit with canteen, shower and wc

    Tell us when you need it and for how long. We reply with hire terms — and a purchase price too if you tick compare.

    What do you need inside?

    Up to 20MB per file

    Hire terms are flexible — tell us how long you need the unit and we will confirm the rate for that period. Delivery and collection for hire are quoted separately, based on distance, site access and the lifting equipment required.

    Make it yours

    Change the module count, layout, windows, doors and finish — then get an instant estimate.

    Open the configurator Custom Design

    Get a price for 4-Module Site Welfare Unit with Canteen, Shower and WC

    Tell us what you need and we'll come back with pricing and lead times — usually within one working day.

    So we can call you back about your enquiry

    Enquiring about: 4-Module Site Welfare Unit with Canteen, Shower and WC

    No obligation. We reply within one working day.