ADACON UK
    Single-storey modular gatehouse positioned at a controlled site entrance
    Two-module P600 gatehouse configured for security and site control at managed entrances.

    Gatehouses

    2-Module Gatehouse with WC and Serving Window

    This single-storey gatehouse combines two P600 modules in an 11.8m run layout, with extensive glazing, a serving window and a requested WC. It suits security and site control at logistics parks, schools and gated developments.

    £25,800ex VAT

    £30,960 inc VAT · indicative configured estimate, subject to quotation. Transport depends on postcode and access; offloading, groundworks and site-specific works are separate.

    Made to order. Build and delivery timing will be confirmed with your quotation.

    Call about this item
    PLACE ORDER

    Order the standard specification online. We'll confirm delivery, access and final order details before accepting your order and issuing your invoice.

    Built to order in approx. 7–8 weeks, then delivery typically within 1–2 weeks. Delivery is priced by postcode and confirmed with your quote.

    Change the layout in the configurator
    Modules
    2
    Storeys
    1
    Approx. usable internal area
    22.8 m² before partitions
    External dimensions
    11.8m x 2.2m footprint

    Design highlights

    • Two P600 modules in a single-storey run
    • 11.8m x 2.2m external footprint
    • Approximately 22.8m2 usable internal area before partitions
    • Sliding drive-through serving window
    • Six large windows across the exposed elevations
    • Single glazed external door
    • Anthracite Grey RAL 7016 insulated external panels

    Configuration and dimensions

    This stored gatehouse configuration uses two steel-framed P600 modules connected in a single-storey run. Together, they form an external footprint of 11.8m x 2.2m and provide approximately 22.8m2 of usable internal area before partitions, based on a conservative per-module allowance. A connected open layout may provide more usable space, but the final area depends on the confirmed internal arrangement.

    Each module measures 5.9m x 2.2m externally and has an external height of 2.40m. The internal ceiling height is 2.16m, while the approximate usable interior of each module is 5.7m x 2.0m. The two-module format creates a long, narrow building suited to controlled entrances where staff need clear views across vehicle or pedestrian approaches. Further context for this application is available under gatehouses.

    Doors, windows and serving access

    Module 1 has a sliding drive-through serving window on its exposed north 5.9m wall. Its south wall contains a single glazed door, providing the external entrance, while the exposed west 2.2m end has one large window.

    Module 2 provides wider observation coverage. Its north 5.9m wall has two large windows, its south 5.9m wall has two large windows, and its exposed east 2.2m end has one large window. These stored openings support a gatehouse role by providing glazing across both long elevations and at the two outer ends of the complete run.

    External panels and roof

    The selected exterior uses included vertical insulated sandwich panels in Anthracite Grey, RAL 7016, with a smooth finish. This selection applies to Module 1’s north, south and west exposed walls and Module 2’s north, east and south exposed walls. The building has a flat roof with an approximately 120mm steel-frame fascia; no additional fascia is included in this configuration.

    Cladding and configuration costs remain subject to quotation. Individual cladding prices are not presented separately because the final quotation confirms the complete specification and commercial total.

    Requested WC and internal finishes

    A WC is requested for confirmation within the final internal layout. Its position, partition arrangement and associated details are not fixed in the stored design. Bathroom walls use 40mm waterproof insulated sandwich panels as standard, with hygienic panels available as an optional selection. Where plaster is selected, it applies outside the bathroom walls.

    Elsewhere, insulated sandwich panels are the included internal wall finish. Any alternative wall treatments and general floor finishes are selected to suit the final room layout and confirmed by quotation. Wet-room PVC flooring applies to shower rooms; this configuration requests a WC rather than a shower room, so no shower-room floor is specified. Layout choices can be reviewed through the building configurator.

    Estimate, transport and siting

    The indicative configured estimate is £25,800 excluding VAT, or £30,960 including VAT, subject to quotation. Transport is priced separately according to the delivery postcode and site access. Offloading or cranage, groundworks and other site-specific works are also separate rather than included within the configured estimate.

    Final siting is subject to survey and confirmation of access, ground conditions and project-specific requirements. The quotation will confirm the final layout, selected finishes, transport arrangements and any site-related works before the order proceeds.

    Full specification

    2 P600 modules (single storey), run layout, 11.8m x 2.2m footprint, approx 22.8 m2 usable internal area before partitions (conservative per-module allowance; connected open layouts may provide more space). Each module is 2.40m externally with a 2.16m internal ceiling; its approximate usable interior is 5.7m x 2.0m.
    Exterior: included vertical insulated sandwich panels in Anthracite Grey (RAL 7016). Roof: flat roof with approximately 120mm steel-frame fascia (no extra fascia).
    Selected outside walls: Module 1 North wall: Standard insulated panel, Anthracite Grey (RAL 7016), Smooth; Module 1 South wall: Standard insulated panel, Anthracite Grey (RAL 7016), Smooth; Module 1 West wall: Standard insulated panel, Anthracite Grey (RAL 7016), Smooth; Module 2 North wall: Standard insulated panel, Anthracite Grey (RAL 7016), Smooth; Module 2 East wall: Standard insulated panel, Anthracite Grey (RAL 7016), Smooth; Module 2 South wall: Standard insulated panel, Anthracite Grey (RAL 7016), Smooth. Cladding prices are quote-only and must not be itemised in public copy.
    Module 1 P600 (ground floor) exposed walls — north (5.9m side): Drive-through serving window (sliding); south (5.9m side): Glazed door (single); west (2.2m end): Large window.
    Module 2 P600 (ground floor) exposed walls — north (5.9m side): Large window + Large window; east (2.2m end): Large window; south (5.9m side): Large window + Large window.
    Requested fit-out to confirm in the final layout: WC. Bathroom walls use 40mm waterproof insulated sandwich panels as standard, with hygienic panels optional; shower rooms use wet-room PVC flooring. Plaster applies outside bathroom walls when selected. Elsewhere insulated sandwich panels are the included wall finish; other finishes are selected for the final room layout.

    Frequently asked questions

    Make it yours

    Change the module count, layout, windows, doors and finish — then get an instant estimate.

    Get a price for 2-Module Gatehouse with WC and Serving Window

    Tell us what you need and we'll come back with pricing and lead times — usually within one working day.

    So we can call you back about your enquiry

    Enquiring about: 2-Module Gatehouse with WC and Serving Window

    No obligation. We reply within one working day.