ADACON UK
    1-module single-storey modular shower block, Adacon modular building (illustrative)
    Single-module P600 modular shower block with WC and shower for construction-sector use.

    Modular Shower Blocks

    Single-Module Shower Block with WC

    This single-storey P600 modular shower block provides a WC and shower within an approx. 11.40 m² usable internal area before partitions. It suits construction sites, campsites and sports clubs that need a compact, fitted facility.

    £12,900ex VAT

    £15,480 inc VAT · indicative configured estimate, subject to quotation. Transport depends on postcode and access; offloading, groundworks and site-specific works are separate.

    Made to order. Build and delivery timing will be confirmed with your quotation.

    Call about this item
    PLACE ORDER

    Order the standard specification online. We'll confirm delivery, access and final order details before accepting your order and issuing your invoice.

    WhatsApp

    Built to order in approx. 7–8 weeks, then delivery typically within 1–2 weeks. Delivery is priced by postcode and confirmed with your quote.

    Change the layout in the configurator
    Modules
    1
    Storeys
    1
    Approx. usable internal area
    11.4 m² before partitions
    External dimensions
    5.9m x 2.2m footprint

    Design highlights

    • One P600 module, single storey
    • 5.9m x 2.2m footprint
    • approx. 11.40 m² usable internal area before partitions
    • WC and shower fit-out
    • Glazed double entrance door
    • Six specified windows, including four high-level units
    • Horizontal Anthracite cladding and flat roof

    A compact, fitted facility

    This configuration uses one P600 steel-framed module to create a practical modular shower block for the Construction sector. It provides approx. 11.40 m² usable internal area before partitions within a 5.9m x 2.2m footprint. The single-storey format is suited to locations where a self-contained WC and shower facility is required without the scale or complexity of a multi-module building. Typical buyers include construction sites, campsites and sports clubs.

    Single-module layout

    The building comprises one ground-floor module in a single layout. There are no upper-floor modules, stairs or linked sections, keeping the footprint straightforward for constrained sites. The internal fit-out includes a WC and shower. Their final service connections and any site-dependent details must be confirmed against the intended location and available utilities.

    The principal entrance is on the south-facing 5.9m wall, which has a glazed double door positioned between two small windows. This arrangement gives the entrance elevation additional natural light while retaining the compact proportions of the module. The north-facing 5.9m wall has two top-only high-level windows. Each 2.2m end wall also has one top-only high-level window, giving four high-level windows across the north, east and west elevations.

    Exterior finish

    The exterior is finished in horizontal Anthracite cladding. A flat roof with a slim fascia keeps the profile clean and low, making the unit suitable for established premises as well as temporary or developing construction sites. The specified mix of smaller windows, high-level glazing and a glazed entrance reflects the functional shower block layout.

    Fit-out and indicative price

    The standard fitted specification for this configuration has an indicative price of £12,900 excluding VAT, or £15,480 including VAT. This price covers the single P600 module in the configuration described, including its specified external finish, doors, windows, WC and shower fit-out. Delivery, groundworks and site-specific works are not included and are quoted separately once the site requirements are known.

    Any changes to the layout, openings, finish or fit-out may affect the final quotation. The standard arrangement can be reviewed using the P600 configurator, but the price stated here applies specifically to the one-module shower block described on this page.

    Lead time and site preparation

    Typical lead time is 8–12 weeks, subject to specification confirmation, production scheduling and site readiness. A confirmed programme should allow for delivery planning and any separate groundworks or utility works.

    The module requires a suitable level, prepared base and clear delivery access for the transport and installation operation. The site must be assessed for vehicle access, lifting requirements, working space and safe positioning. Water, drainage and electrical requirements should also be established before installation. Foundations, utility connections and other location-specific works fall outside the indicative module price and will be assessed and quoted separately.

    Full specification

    1 P600 modules (single storey), single layout, 5.9m x 2.2m footprint, approx. 11.40 m² usable internal area before partitions.
Exterior: horizontal cladding in Anthracite. Roof: flat roof with slim fascia.
Module 1 (ground floor) exposed walls — north (5.9m side): Top-only window (high level) + Top-only window (high level); east (2.2m end): Top-only window (high level); south (5.9m side): Small window + Glazed door (double) + Small window; west (2.2m end): Top-only window (high level).
Internal fit-out includes: WC, shower.

    Frequently asked questions

    Modular Shower BlocksModular buildings for ConstructionAll modular building designsDesign your own P600
    Also available to hire

    Hire Single-Module Shower Block with WC in the UK

    Need single-module shower block with wc for a fixed period? Hire it instead of buying. Adacon manufactures the building to your layout and hands it over on hire terms, then collects it when you no longer need it — with the same quality, fit-out and design freedom as a purchase.

    Same factory build
    The same single-module shower block with wc we sell, manufactured to your layout — not a tired fleet unit.
    Weeks to years
    Hire for a project, a season, a term or several years, and extend if plans change.
    Any size or storey
    P300, P400, P500, P600 and P700 units joined side by side or stacked to two storeys.
    Ready to use
    Insulated, wired, lit and fitted out in the factory before it reaches site.
    Hire or buy — priced both ways
    Not sure? Tick compare and we price hire against buying for your period.
    UK-wide
    Delivery and collection quoted to your site as part of the hire price.
    Typical hire periods
    1–3 months3–12 months1–3 years3+ years
    Get a hire priceToilet & Shower Block Hire

    Hire terms are flexible — tell us how long you need the unit and we will confirm the rate for that period.

    Get a hire price for single-module shower block with wc

    Tell us when you need it and for how long. We reply with hire terms — and a purchase price too if you tick compare.

    What do you need inside?

    Up to 20MB per file

    Hire terms are flexible — tell us how long you need the unit and we will confirm the rate for that period. Delivery and collection for hire are quoted separately, based on distance, site access and the lifting equipment required.

    Make it yours

    Change the module count, layout, windows, doors and finish — then get an instant estimate.

    Open the configurator Custom Design

    Get a price for Single-Module Shower Block with WC

    Tell us what you need and we'll come back with pricing and lead times — usually within one working day.

    So we can call you back about your enquiry

    Enquiring about: Single-Module Shower Block with WC

    No obligation. We reply within one working day.