Site Welfare Units
2-Module Site Welfare Unit with Kitchenette, WC and Shower
This single-storey, two-module P600 site welfare unit has a requested kitchenette, WC and shower within an approximately 22.8m² usable internal area before partitions. It suits construction sites planning canteen, drying room and WC facilities within one linked configuration.
£27,400ex VAT
£32,880 inc VAT · indicative configured estimate, subject to quotation. Transport depends on postcode and access; offloading, groundworks and site-specific works are separate.
Made to order. Build and delivery timing will be confirmed with your quotation.
Order the standard specification online. We'll confirm delivery, access and final order details before accepting your order and issuing your invoice.
Built to order in approx. 7–8 weeks, then delivery typically within 1–2 weeks. Delivery is priced by postcode and confirmed with your quote.
- Modules
- 2
- Storeys
- 1
- Approx. usable internal area
- 22.8 m² before partitions
- External dimensions
- 5.9m x 4.4m footprint
Design highlights
- Two linked P600 modules in a single-storey grid layout
- 5.9m x 4.4m external footprint
- Approximately 22.8m² usable internal area before partitions
- Double glazed entrance door with small and high-level windows
- Anthracite ARLINE AR16016 vertical grooved plank cladding
- Kitchenette, WC and shower requested for the final layout
- Indicative estimate of £27,400 ex VAT
Two-module single-storey layout
This site welfare unit uses two P600 steel-framed modules linked side by side in a grid layout. Together, they form a 5.9m x 4.4m external footprint and provide approximately 22.8m² of usable internal area before partitions, based on a conservative allowance for each module. A connected open layout may provide more usable space, depending on the final room arrangement.
Each module has an approximate usable interior of 5.7m x 2.0m. The modules are approximately 2.40m high externally, with a 2.16m internal ceiling. The single-storey arrangement is intended for the Construction sector and buyers planning canteen, drying room and WC provision. Further context is available under site welfare units.
Windows and entrance
On Module 1, the exposed north wall has a small window, a double glazed door and a second small window. Its exposed east end has two small windows, while the exposed west end also has two small windows.
Module 2 has two small windows on its exposed east end and two small windows on its exposed west end. The exposed south wall has two top-only, high-level windows. These are the stored openings for this configuration; their relationship to partitions and internal facilities is confirmed through the final layout.
Anthracite external finish
The selected exposed walls are finished between the frame in Anthracite ARLINE AR16016 grooved plank cladding with vertical boards. This applies to the north, east and west walls of Module 1, and the east, south and west walls of Module 2. The roof is flat and uses the approximately 120mm steel-frame fascia, with no additional fascia specified.
Requested welfare fit-out
The requested fit-out comprises a kitchenette, WC and shower. Their final positions, partitions, fixtures and finishes remain subject to confirmation in the room layout and quotation. The available space can also support the wider canteen and drying-room needs commonly associated with construction-site welfare, but those areas are not separately defined in the stored design.
Insulated sandwich panels are the included wall finish outside the bathroom specification. Bathroom walls use 40mm waterproof insulated sandwich panels as standard, with hygienic panels available as an option. The shower room uses wet-room PVC flooring. Where selected, plaster applies to wall faces outside bathroom walls. Other finishes depend on the final room layout and selections recorded through the building configurator.
Estimate, transport and siting
The indicative configured estimate is £27,400 excluding VAT, or £32,880 including VAT, subject to quotation. Transport is priced separately according to the delivery postcode and site access. Offloading or cranage, groundworks and other site-specific works are also separate.
Siting is subject to a survey of access, levels, ground conditions and the proposed position. The survey and quotation establish the relevant transport requirements and any site works needed for this exact two-module configuration. Final details also confirm the internal arrangement and selected finishes.
Full specification
2 P600 modules (single storey), grid layout, 5.9m x 4.4m footprint, approx 22.8 m2 usable internal area before partitions (conservative per-module allowance; connected open layouts may provide more space). Each module is 2.40m externally with a 2.16m internal ceiling; its approximate usable interior is 5.7m x 2.0m. Exterior: ARLINE AR16016 grooved plank applied to exposed walls between the frame in Anthracite. Roof: flat roof with approximately 120mm steel-frame fascia (no extra fascia). Selected outside walls: Module 1 North wall: Full-wall cladding, Anthracite, ARLINE AR16016 grooved plank, vertical boards; Module 1 East wall: Full-wall cladding, Anthracite, ARLINE AR16016 grooved plank, vertical boards; Module 1 West wall: Full-wall cladding, Anthracite, ARLINE AR16016 grooved plank, vertical boards; Module 2 East wall: Full-wall cladding, Anthracite, ARLINE AR16016 grooved plank, vertical boards; Module 2 South wall: Full-wall cladding, Anthracite, ARLINE AR16016 grooved plank, vertical boards; Module 2 West wall: Full-wall cladding, Anthracite, ARLINE AR16016 grooved plank, vertical boards. Cladding prices are quote-only and must not be itemised in public copy. Module 1 P600 (ground floor) exposed walls — north (5.9m side): Small window + Glazed door (double) + Small window; east (2.2m end): Small window + Small window; west (2.2m end): Small window + Small window. Module 2 P600 (ground floor) exposed walls — east (2.2m end): Small window + Small window; south (5.9m side): Top-only window (high level) + Top-only window (high level); west (2.2m end): Small window + Small window. Requested fit-out to confirm in the final layout: kitchenette, WC, shower. Bathroom walls use 40mm waterproof insulated sandwich panels as standard, with hygienic panels optional; shower rooms use wet-room PVC flooring. Plaster applies outside bathroom walls when selected. Elsewhere insulated sandwich panels are the included wall finish; other finishes are selected for the final room layout.
Frequently asked questions
Make it yours
Change the module count, layout, windows, doors and finish — then get an instant estimate.
Get a price for 2-Module Site Welfare Unit with Kitchenette, WC and Shower
Tell us what you need and we'll come back with pricing and lead times — usually within one working day.