
Modular Shops
Single-Module P600 Modular Shop
This single-storey P600 modular shop provides a compact, extensively glazed retail space with a requested WC fit-out. It is suited to independent retailers, farm shops and pop-up operators seeking a defined single-module configuration.
£14,100ex VAT
£16,920 inc VAT · indicative configured estimate, subject to quotation. Transport depends on postcode and access; offloading, groundworks and site-specific works are separate.
Made to order. Build and delivery timing will be confirmed with your quotation.
Order the standard specification online. We'll confirm delivery, access and final order details before accepting your order and issuing your invoice.
Built to order in approx. 7–8 weeks, then delivery typically within 1–2 weeks. Delivery is priced by postcode and confirmed with your quote.
- Modules
- 1
- Storeys
- 1
- Approx. usable internal area
- 11.4 m² before partitions
- External dimensions
- 5.9m x 2.2m footprint
Design highlights
- One P600 module arranged over a single storey
- 5.9m x 2.2m external footprint
- Approximately 11.4m² usable internal area before partitions
- Six large windows and one single glazed door
- Vertical ARLINE AR16016 grooved cladding in Teak
- Requested WC fit-out, subject to final layout confirmation
- Flat roof with approximately 120mm steel-frame fascia
Compact retail space in one P600 module
This configuration uses one P600 module arranged over a single storey for a compact modular shop. Its external footprint is 5.9m x 2.2m, with an approximate usable interior of 5.7m x 2.0m. It provides approximately 11.4m² of usable internal area before partitions, based on a conservative per-module allowance. The requested WC will reduce the open retail area once its position and dimensions are confirmed in the final layout.
The module is approximately 2.40m high externally and has a 2.16m internal ceiling. This proportion creates a straightforward single-level setting for customer-facing retail use, without introducing additional modules, upper floors or unconfirmed rooms.
Windows and customer access
The north 5.9m wall has two large windows. The opposite south wall combines two large windows with a single glazed door, providing the specified entrance to the shop. Each 2.2m end wall also has one large window: one on the east elevation and one on the west elevation.
These openings form part of this stored configuration and give all four elevations glazing. The arrangement is relevant to retailers planning display zones, counters or freestanding merchandise, although the final internal room layout, furniture and retail fittings are not fixed by this specification.
Teak-effect grooved external finish
All four exposed outside walls are selected with ARLINE AR16016 grooved plank cladding in Teak. The boards run vertically and are applied between the steel frame, covering the full exposed wall areas around the specified door and windows. Cladding remains subject to the final quotation and is not separately itemised in this product description.
Above, the module has a flat roof with an approximately 120mm steel-frame fascia. No additional fascia has been selected. Final colours, junction details and illustrated finishes are confirmed as part of the quotation rather than guaranteed from visual examples alone.
Requested WC and internal finishes
A WC has been requested for this shop, but its final position and detailed fit-out must be confirmed within the room layout. Bathroom walls use 40mm waterproof insulated sandwich panels as standard. Hygienic wall panels may be selected as an option, while plaster can be applied outside bathroom walls where chosen.
Elsewhere, insulated sandwich panels are the included internal wall finish. Any alternative wall finishes are selected and confirmed for the final layout. If a shower room were subsequently selected, wet-room PVC flooring would apply within that room; a shower is not included in this stored WC configuration. Other flooring and decorative finishes are not specified in the brief and therefore remain subject to quotation.
Configured estimate and site considerations
The indicative configured estimate is £14,100 excluding VAT, or £16,920 including VAT, subject to quotation. Transport is priced separately according to the delivery postcode and site access. Offloading or cranage, groundworks and other site-specific works are also separate and are not included in the indicative estimate.
Siting is subject to a survey of the proposed location, access and relevant site conditions. Requirements can be reviewed through the building configurator, but the quotation will confirm the final layout, fit-out, finishes, transport requirements and site-specific scope for this exact project.
Full specification
1 P600 module (single storey), single layout, 5.9m x 2.2m footprint, approx 11.4 m2 usable internal area before partitions (conservative per-module allowance; connected open layouts may provide more space). Each module is 2.40m externally with a 2.16m internal ceiling; its approximate usable interior is 5.7m x 2.0m. Exterior: ARLINE AR16016 grooved plank applied to exposed walls between the frame in Teak. Roof: flat roof with approximately 120mm steel-frame fascia (no extra fascia). Selected outside walls: Module 1 North wall: Full-wall cladding, Teak, ARLINE AR16016 grooved plank, vertical boards; Module 1 East wall: Full-wall cladding, Teak, ARLINE AR16016 grooved plank, vertical boards; Module 1 South wall: Full-wall cladding, Teak, ARLINE AR16016 grooved plank, vertical boards; Module 1 West wall: Full-wall cladding, Teak, ARLINE AR16016 grooved plank, vertical boards. Cladding prices are quote-only and must not be itemised in public copy. Module 1 P600 (ground floor) exposed walls — north (5.9m side): Large window + Large window; east (2.2m end): Large window; south (5.9m side): Large window + Glazed door (single) + Large window; west (2.2m end): Large window. Requested fit-out to confirm in the final layout: WC. Bathroom walls use 40mm waterproof insulated sandwich panels as standard, with hygienic panels optional; shower rooms use wet-room PVC flooring. Plaster applies outside bathroom walls when selected. Elsewhere insulated sandwich panels are the included wall finish; other finishes are selected for the final room layout.
Frequently asked questions
Make it yours
Change the module count, layout, windows, doors and finish — then get an instant estimate.
Get a price for Single-Module P600 Modular Shop
Tell us what you need and we'll come back with pricing and lead times — usually within one working day.