ADACON UK
    3-module single-storey modular toilet block, Adacon modular building (illustrative)
    Three-module, single-storey P600 modular toilet block for permanent WC provision on construction sites.

    Modular Toilet Blocks

    3-Module Toilet Block with WC

    This single-storey modular toilet block combines three P600 modules to provide approximately 39m² of permanent WC space. It suits construction sites, event venues and sports grounds that need a substantial fitted facility rather than a temporary portable unit.

    £38,700ex VAT

    £46,440 inc VAT · indicative configured estimate, subject to quotation. Transport depends on postcode and access; offloading, groundworks and site-specific works are separate.

    Made to order. Build and delivery timing will be confirmed with your quotation.

    Call about this item
    PLACE ORDER

    Order the standard specification online. We'll confirm delivery, access and final order details before accepting your order and issuing your invoice.

    WhatsApp

    Built to order in approx. 7–8 weeks, then delivery typically within 1–2 weeks. Delivery is priced by postcode and confirmed with your quote.

    Change the layout in the configurator
    Modules
    3
    Storeys
    1
    Floor area
    39 m²
    Footprint
    5.9m x 6.6m footprint

    Design highlights

    • Three linked P600 modules
    • Single-storey 5.9m x 6.6m footprint
    • Approximately 39m² internal floor area
    • Single glazed entrance door with two small windows
    • Eight high-level, top-only windows
    • Smooth Dark grey external cladding
    • WC included in the internal fit-out

    Wide, single-storey layout

    This configuration uses three P600 steel-framed modules linked side by side to create a wide, single-storey building. Each module measures 5.9m by 2.2m, producing an overall footprint of 5.9m by 6.6m and approximately 39m² of internal floor area. The linked layout provides a practical amount of enclosed space for permanent WC provision while keeping the building to one level.

    Designed as a modular toilet block for the construction sector, it is also suitable for events and sports grounds requiring a permanent facility. The internal fit-out includes a WC. Final sanitary arrangements and any site-specific service requirements should be confirmed during the order process.

    Module-by-module arrangement

    Module 1 forms the north side of the building and contains the only external entrance. Its exposed 5.9m north elevation has a small window, a single glazed door and a second small window. The exposed east and west 2.2m ends each have one high-level, top-only window.

    Module 2 sits in the centre of the layout, linked to Modules 1 and 3 along its long sides. Its exposed east and west ends each contain one high-level, top-only window. With no entrance on this module, access is provided internally from the adjoining sections of the building.

    Module 3 forms the south side. Its east and west ends each have one high-level, top-only window, while the exposed south elevation has two further high-level, top-only windows. Across the complete configuration, the entrance elevation is clearly defined by the glazed door and two smaller windows, with high-level windows positioned around the remaining exposed elevations.

    External finish and roof

    The exterior is finished in smooth Dark grey cladding for a clean, restrained appearance suited to working sites and managed public grounds. A flat roof with a slim fascia keeps the overall profile simple and compact. As a modular system, the three factory-manufactured sections are transported separately and linked together on the prepared site.

    Price and programme

    The indicative price is £32,250 excluding VAT, or £38,700 including VAT, for the standard fitted specification described here. This covers the three-module P600 building with its stated cladding, roof, door, window arrangement and WC fit-out. Delivery, groundworks and site-specific works are not included and are quoted separately once the location and project requirements are known.

    A typical lead time is 8–12 weeks. The exact programme depends on order confirmation, final specification, production capacity and readiness of the site. Buyers can review the P600 format and configuration options using the P600 configurator.

    Preparing the site

    The building requires a suitable level base or foundation arrangement, with adequate access for delivery, offloading and installation of all three modules. Ground conditions, vehicle access and working space should be assessed before delivery is booked. Required drainage, water, power and other service connections must also be planned for the WC installation.

    Groundworks, utility connections, external drainage runs and any location-specific adaptations are treated as site-specific works. Planning and regulatory requirements vary by site, so the buyer should confirm the approvals applicable to the intended location before installation.

    Full specification

    3 P600 modules (single storey), wide layout, 5.9m x 6.6m footprint, approx 39 m2 internal floor area.
Exterior: smooth cladding in Dark grey. Roof: flat roof with slim fascia.
Module 1 (ground floor) exposed walls — north (5.9m side): Small window + Glazed door (single) + Small window; east (2.2m end): Top-only window (high level); west (2.2m end): Top-only window (high level).
Module 2 (ground floor) exposed walls — east (2.2m end): Top-only window (high level); west (2.2m end): Top-only window (high level).
Module 3 (ground floor) exposed walls — east (2.2m end): Top-only window (high level); south (5.9m side): Top-only window (high level) + Top-only window (high level); west (2.2m end): Top-only window (high level).
Internal fit-out includes: WC.

    Frequently asked questions

    Modular Toilet BlocksModular buildings for ConstructionAll modular building designsDesign your own P600
    Also available to hire

    Hire 3-Module Toilet Block with WC in the UK

    Need 3-module toilet block with wc for a fixed period? Hire it instead of buying. Adacon manufactures the building to your layout and hands it over on hire terms, then collects it when you no longer need it — with the same quality, fit-out and design freedom as a purchase.

    Same factory build
    The same 3-module toilet block with wc we sell, manufactured to your layout — not a tired fleet unit.
    Weeks to years
    Hire for a project, a season, a term or several years, and extend if plans change.
    Any size or storey
    P300, P400 and P600 units joined side by side or stacked to two storeys.
    Ready to use
    Insulated, wired, lit and fitted out in the factory before it reaches site.
    Hire or buy — priced both ways
    Not sure? Tick compare and we price hire against buying for your period.
    UK-wide
    Delivery and collection quoted to your site as part of the hire price.
    Typical hire periods
    1–3 months3–12 months1–3 years3+ years
    Get a hire priceToilet & Shower Block Hire

    Hire terms are flexible — tell us how long you need the unit and we will confirm the rate for that period.

    Get a hire price for 3-module toilet block with wc

    Tell us when you need it and for how long. We reply with hire terms — and a purchase price too if you tick compare.

    What do you need inside?

    Up to 20MB per file

    Hire terms are flexible — tell us how long you need the unit and we will confirm the rate for that period. Delivery and collection for hire are quoted separately, based on distance, site access and the lifting equipment required.

    Make it yours

    Change the module count, layout, windows, doors and finish — then get an instant estimate.

    Open the configurator Custom Design

    Get a price for 3-Module Toilet Block with WC

    Tell us what you need and we'll come back with pricing and lead times — usually within one working day.

    So we can call you back about your enquiry

    Enquiring about: 3-Module Toilet Block with WC

    No obligation. We reply within one working day.