Beauty Salon with Kitchenette and WC

A compact, self-contained salon layout

This configuration uses one P600 module in a wide, single-storey layout. The module measures 5.9m by 2.2m and provides approx. 11.40 m² usable internal area before partitions, giving an independent beauty therapist or salon owner a practical space for appointments, preparation and essential facilities without the scale of a larger multi-module building.

The interior is delivered to a full fit-out standard and includes a kitchenette and WC. These facilities make the building self-contained for day-to-day salon use, while leaving the remaining space available for the buyer’s chosen treatment furniture, storage and specialist beauty equipment. The final working arrangement can be planned around the fixed door, window, kitchenette and WC positions.

Module 1: doors, windows and internal facilities

Module 1 contains the complete salon. The north-facing 5.9m wall has two large windows. On the opposite south-facing wall, a single glazed door is positioned between two further large windows, providing the main entrance and an open, well-lit frontage. Each 2.2m end wall also has a full-size window, resulting in glazing on every exposed elevation.

• North wall: two large windows
• East end wall: one full-size window
• South wall: two large windows with a single glazed door between them
• West end wall: one full-size window

This arrangement gives the compact interior natural light from all four sides. It is particularly well suited to a standalone garden salon, a dedicated treatment room within commercial premises or another appropriately prepared site. Further information about this type of space is available on the beauty salons page.

Exterior finish and fitted specification

The steel-framed P600 module is finished externally in timber-effect timber cladding. A flat roof with a slim fascia keeps the overall appearance simple and contemporary. The building is supplied as a complete modular structure rather than a shell, with the specified windows, glazed entrance door, kitchenette and WC forming part of this fitted configuration.

The indicative price is £12,900 excluding VAT, or £15,480 including VAT, for the standard fitted specification. Delivery, groundworks and site-specific works are quoted separately because access, travel distance, service requirements and ground conditions vary by location. The final quotation will set out the exact supply and project scope for the chosen site.

Lead time, delivery and siting

A typical lead time is 8–12 weeks, subject to the confirmed specification, project schedule and site readiness. Buyers should allow time before delivery for any required permissions, groundworks and utility planning. The kitchenette and WC will require suitable site services, with the necessary connections assessed and priced according to the property.

The site must be ready for safe delivery and installation of a 5.9m by 2.2m module. Delivery vehicle access, lifting access, boundary restrictions and the position of nearby buildings or overhead obstructions should be considered during planning. Suitable groundworks must also be completed before installation. These items are site dependent and are not included in the indicative product price.

The P300/P400/P600 modular range can be reviewed in more detail through the P600 configurator. For this exact configuration, the key parameters are one module, one storey, a 5.9m by 2.2m footprint and approximately 12 m² of fitted internal space.